Instructions for Use:

1. Preheat or precool the bottle with a small amount of hot or cold water to achieve optimal insulation performance.
2. When tightening the lid, rotate clockwise; when opening, rotate counterclockwise.
3. If not used for a long time, dry the inside and outside to keep it clean and dry.
4. Do not overfill with water to avoid overflow when closing the lid, which may cause burns.
5. After filling with milk or other perishable drinks, consume as soon as possible and clean promptly to prevent spoilage and corrosion of the inner liner.
6. Avoid any form of direct heating or placing in high-temperature environments. Do not place the product on open flames, induction cookers, microwave ovens, or in dishwashers, as this may cause deformation, discoloration, and reduced insulation performance.
7. Do not use steam sterilization or soak in boiling water, as this may cause the printed design to peel off.

Precautions:

1. Keep the product out of reach of infants and young children to avoid burns or injuries.
2. Do not fully immerse the product in water.
3. Avoid placing near heat sources such as open flames or heaters (may cause deformation or discoloration).
4. Do not fill with the following: carbonated drinks, salty soups, juices, etc.
5. Do not open the lid while the bottle is tilted (hot water may spill and cause burns or contamination).
6. Avoid dropping, collisions, or strong impacts to prevent dents or damage.
7. Do not use cleaning agents such as thinners, gasoline, metal polishing powders, steel wool, or abrasive cleaners, as they may cause scratches or damage.
8. Do not place this product in a refrigerator.

Capacity: 1000 ml
Dimensions: 10.3 × 10.3 × 26.8 cm
Heat Retention Performance:
At an ambient temperature of 20°C, with 95°C hot water, after 6 hours the temperature remains ≥ 40°C.
Standard:
GB/T 29606-2013 (Stainless Steel Vacuum Flask)